INTERMAT launch for Volvo DD25 asphalt roller

Designed for smaller compaction projects, Volvo’s DD25 and DD25W are double drum compactors that fit into the 2.5 tonne weight class.
February 7, 2012 Read time: 1 min
Volvo's DD25 live at INTERMAT
%$Linker: 2 Internal 2 4802 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">RSS</span></span> Road Paving and Recycling false /event-news/intermat-2012/rss/road-paving-and-recycling/ true false%>Designed for smaller compaction projects, 2394 Volvo’s DD25 and DD25W are double drum compactors that fit into the 2.5 tonne weight class.

Adjustable frequency is available from 3,300vpm/55 Hz to 4,000vpm/67 Hz, achieved by moving the throttle.

Drums are machined to be perfectly round said Volvo, while the outer 20mm of each drum is chamfered and the edges are given a 9mm radius. These features contribute to a smooth rolling finish that doesn’t mark the asphalt, it said.

Both drums also include a pressurised water system that provides a constant flow to the drum surfaces.

The DD25 compactor uses a 24.8kW three-cylinder diesel engine, and an integral safety system will shut down the engine and apply the brakes should the operator get off the seat.

%$Linker: External 0 0 0 oLinkExternal www.volvoce.com Volvo false http://www.volvoce.com/ false false%>

Hall: 6 Stand: C041 / C042

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • On-board weighing for trucks
    April 20, 2012
    Italian technology company Outset has introduced two additional on-board weighing systems. The Lanx WL is a wireless control unit designed for use on road-going tipper trucks. It provides a real-time display of the net, gross, trailer and tractor axle weights, with an acoustic alarm to prevent overloading. The Lanx HD is intended for use in rigid dump trucks, and is directly installed in the cab. It displays the weight on board, allowing readings for each axle, and memorise round-trips for later download.
    Read More
  • One-touch chassis levelling and stabilisation for ROTO models
    January 6, 2017
    Italian manufacturer Merlo has developed an automatic chassis levelling and stabilisation system for its ROTO range of rotating telescopic handlers. Rather than using individual controls for each stabiliser leg, the operator pushes a button to both level the chassis and stabilise the machine for heavy lifting. This greatly reduces set-up time and increases safety.
    Read More
  • One-touch chassis levelling and stabilisation for ROTO models
    April 16, 2012
    Italian manufacturer Merlo has developed an automatic chassis levelling and stabilisation system for its ROTO range of rotating telescopic handlers. Rather than using individual controls for each stabiliser leg, the operator pushes a button to both level the chassis and stabilise the machine for heavy lifting. This greatly reduces set-up time and increases safety.
    Read More
  • Liebherr adds TA240 to ADT line-up
    January 6, 2017
    Liebherr has added a second model to its articulated hauler range with the TA240. The 40 tonne capacity truck has a 27m3 body and a 6x6 driveline. Power comes from a 16.2 litre Stage IIIB Liebherr V8 diesel engine delivering 350kW (476hp). This enables the truck to reach maximum speeds of up to 57km/h. A high performance retarder helps to bring the truck to a halt and can be preselected, with both the engine brake and the retarder working as soon as the driver lifts their foot from the throttle pedal. Wet,
    Read More

Highlighted Content