Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
INTERMAT sees the world release of the Master Mix 1000 compact mobile asphalt plant by German manufacturer Benninghoven. The Master Mix 1000 is designed with smaller asphalt operations in mind. With the entire asphalt plant constructed on one chassis, customers can expect to be producing asphalt within a day of delivery. “Flexibility and transportability were the key design criteria,” said company spokesman Bernd Benninghoven.
Anaconda Equipment has launched the FTR 150 feeder conveyor, which is transported by container and transforms ready for use once it arrives on site. The FTR 150 has been designed for a wide range of applications including quarrying. It allows feeds to be controlled through use of a surge feeder. The driver can deposit loads of up to 9m3, which are then conveyed for crushing and screening. The system can also be fitted with a grid and a screen for use as a scalping/screening unit.
Anaconda Equipment has launched the FTR 150 feeder conveyor, which is transported by container and transforms ready for use once it arrives on site. The FTR 150 has been designed for a wide range of applications including quarrying. It allows feeds to be controlled through use of a surge feeder. The driver can deposit loads of up to 9m3, which are then conveyed for crushing and screening. The system can also be fitted with a grid and a screen for use as a scalping/screening unit.
Affectionately dubbed by Shantui as its Intermat “Big Daddy”, the SD32 bulldozer is said to be a “monster” performer on heavy duty earth-moving jobs, while showcasing the Chinese company’s prowess with high efficiency push factors.
