Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
Caterpillar, in cooperation with the Cat dealer in France, Bergerat Monnoyeur, says that innovative design of its 966K XE wheel loader will take centre stage at Intermat.
Engcon has introduced a new range of tilt-rotators, using a cast housing to greatly increase capacity.
The EC218 and EC226 replace the EC15 and EC20 respectively. The former is suitable for machines up to 18tonnes in operating weight, while the latter is designed for excavators up to 26 tonnes. The cast housing incorporates internal lubrication channels for centralised greasing, reducing the risk of dust ingress or damage while operating. Larger bushes are used to reduce the chance of play in the housing
Engcon has introduced a new range of tilt-rotators, using a cast housing to greatly increase capacity.
The EC218 and EC226 replace the EC15 and EC20 respectively. The former is suitable for machines up to 18tonnes in operating weight, while the latter is designed for excavators up to 26 tonnes. The cast housing incorporates internal lubrication channels for centralised greasing, reducing the risk of dust ingress or damage while operating. Larger bushes are used to reduce the chance of play in the housing
The DT12 crawler-mounted dumper can work as a self-loading unit to dramatically cut loading times while boosting efficiency, according to its manufacturers Wacker Neuson.
