Genie boom lift is a good fit for indoors and outdoors

The new Genie Z-33/18 electric boom lift is just as comfortable indoors as out. “It’s small, compact, and can be used outside and inside,” said Philippa Makinson, marketing coordinator for Terex Aerial Work Platforms.
January 6, 2017 Read time: 1 min
Electric power is one reason the Genie boom lift works well indoors.

The new 5047 Genie Z-33/18 electric boom lift is just as comfortable indoors as out.

“It’s small, compact, and can be used outside and inside,” said Philippa Makinson, marketing coordinator for 1222 Terex Aerial Work Platforms.

The horizontal reach of boom lifts is often desired, yet utilising the machines indoors is not possible because of emissions and tyres. The Genie Z-33/18 is electric, eliminating the emissions challenge. It also features solid non-marking or optional multi-surface tyres, making it ideal for use in stores, airports and theatres, among other indoor locations.

“It goes where scissors are usually used, including tight spaces,” said Makinson. Yet it can perform outdoors, too.

The Z-33/18 weighs 3640 kg and offers a ground clearance of 15 cm. It has long working cycles due to a low-consumption AC drive transmission. The machine has the ability to drive at maximum height, and utilises the Genie FastMast boom system that shortens ground-to-top lifting time.

For more information on companies in this article

Related Content

  • JCB introduces compact telehandler that meets emission regulations
    January 6, 2017
    JCB is expanding its telehandler line-up with the addition of the compact 525-60 at Conexpo. According to the firm, the 525-60 offers full-size telehandler performance in a compact chassis. Maximum lift height is 6m and its load capacity is 2.5 tonnes, while the 525-60 is just 1.8m wide and 1.91m tall. This allows it to be operated in sites with limited space. The 525-60 Hi-Viz replaces the rear-engined 524-50, 527-55 and the 520-50 models, and features a side-mounted engine design. This permits a low boom
    Read More
  • Vögele demonstrates spray system
    February 28, 2012
    Vögele expects to find new customers for its latest Sprayjet system following successful demonstrations to UK contractors. The SprayJet machine was used to repair a busy road in Ipswich, in eastern England, placing the tack coat and asphalt surface in a single pass.
    Read More
  • Formwork developments in bridge construction
    February 23, 2012
    Major infrastructure projects worldwide are relying on innovative formwork solutions for speed and safety as Patrick Smith reports. The 970m long cable-stayed Golden Ears Bridge crossing the Fraser River in Vancouver, Canada, is the core element of a six-lane, highway project near the Canadian west coast.
    Read More
  • Pre-stressed bridge decks use modular formwork system
    July 9, 2012
    Imaginative formwork, often using modular components, is helping to shape some challenging bridges worldwide. Patrick Smith reports Traffic volumes in and around Prague have swollen massively in recent years, pushing the existing road network to the limits of its capacity. To permanently ease congestion in the Czech capital's centre, a multi-lane orbital motorway is under construction as a high capacity bypass for central Prague and to link up all the motorways and other major highways radiating from the ci
    Read More

Highlighted Content