Skip to main content

Government is “Passing Water Pollution Buck to the Car Industry”, experts warn.

The Government acknowledged the serious and growing impacts of poisonous particle pollution from brake, tyre and road surface wear on the environment and human health - but diverted attention away from the immediate and urgent need to stop it entering directly into rivers and streams, water quality specialists have warned. Environment Minister Therese Coffey responded to a scientific report published by the Air Quality Expert Group by telling car and tyre manufacturers to prepare to reduce non-exhaust em
August 23, 2019 Read time: 4 mins
The Government acknowledged the serious and growing impacts of poisonous particle pollution from brake, tyre and road surface wear on the environment and human health - but diverted attention away from the immediate and urgent need to stop it entering directly into rivers and streams, water quality specialists have warned.


Environment Minister Therese Coffey responded to a scientific report published by the %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external Air Quality Expert Group false https://www.gov.uk/government/news/government-targets-particulate-matter-and-microplastic-pollution-from-cars false false%> by telling car and tyre manufacturers to prepare to reduce non-exhaust emissions and support the development of international measurement standards.  

The AQEG report made it clear that it is not just fumes from car exhaust pipes that have a detrimental impact on human health but also the tiny particles that are released from their brakes and tyres. While measures are being taken to reduce exhaust emissions, the report states that Non-Exhaust Emissions (NEE) remain largely unregulated and very little research has been done to understand their full impact.

The Government’s announcement warned that particles are entering the airstream and having a detrimental impact on human health for drivers, passengers and bystanders. It acknowledged that plastic particles from tyres are also deposited into sewers and lead to harmful consequences to marine wildlife and aquatic food chains.

Jo Bradley, Water Quality Specialist with SDS Limited, stated:

“Improving car and tyre designs to reduce metals, microplastics and hydrocarbons pollution will take years, especially if international standards of measurement and manufacturing control are also to be agreed and ratified.

“If the Government confirms the serious health and environmental impacts of this pollution then why is it passing the buck to the car industry and diverting attention from the need to stop harmful and widespread pollution from happening right now?

“Particles from brake and tyre wear include copper and zinc, microplastics and a group of chemicals called Polyaromatic Hydrocarbons (PAHs). They not only pervade the air but also settle on the road surface. When it rains mutagenic, carcinogenic, bioaccumulative chemicals are being discharged directly into the water environment via highway drainage outfalls.

“The regulations exist to control an estimated 1 million outfalls in the UK through environmental permitting, but they are not enforced, especially on motorways and trunk roads where many discharges are direct into vulnerable ditches and tributaries.   According to 8100 Highways England (HE) assessment tool (HAWRAT), more than 2500 outfalls in England pose a ‘very high’ or ‘high’ risk of pollution.  

“It’s been estimated that more than 60,000 tonnes of microplastics alone are being emitted on the road network annually1.  The EA has reported that only 14% of rivers in England reach ‘good’ ecological status and that urban and transport pressures are a significant contributor to those failures.

“UK industry has extensive know-how and innovative surface water technologies to solve the problem. Sustainable Drainage Systems (SuDS), usually comprising a management train of vegetative features and manufactured drainage devices, can capture microplastics, metals and PAHs entering the water environment. While there has been some welcome progress, many more point-source discharges could be measured and routinely controlled with straightforward treatment devices, such as filter drains. Where pollution is more severe, innovative technologies have been developed that capture metals and remove sediments, including microplastics, cost-effectively to shield the environment from harm.

“Yet, urban runoff persists as a forgotten polluter.  It is inconsistently monitored and poorly controlled.  This shocking Government response to the AQEG has – quite literally - kicked the contamination further down the road.”

About Jo Bradley:  Jo Bradley is an environmental water quality and sustainable drainage specialist at SDS Limited.  Before joining the company as Market Development Manager in 2016, Jo spent a 20 year career at the Environment Agency, latterly as an expert advisor on urban stormwater and highway runoff.

For more information on companies in this article

Related Content

  • Innovative advances in warm Mix Asphalts
    February 1, 2013
    Rising energy costs and increased awareness of safety and environmental issues have encouraged the development of Warm Mix Asphalts (WMA), which are typically produced at temperatures of between 130°C and 145°C, compared with around 175°C for traditional Hot Mix Asphalt (HMA). WMAs are regularly used in many European countries, as well as both North and South America. The three most common ways to lower the working temperature of asphalt are: a) foaming technologies; b) wax additives; and c) chemical (surfa
  • Trends in compaction machine technology
    February 20, 2012
    More efficient and productive compaction solutions are coming to market shortly, Mike Woof reports. Several key trends are emerging in the asphalt compaction market with the development of the latest generation machines. Performance and productivity remain key issues for compactor manufacturers with firms keen to maximise output from their latest units.
  • All-new road markings on world’s highways
    June 28, 2013
    Road marking manufacturers have many innovative new products either currently being used on major highways or set to be made available within the next couple of years. Guy Woodford reports. Daan Roosegaarde, an artist, and Hans Goris, a manager at Dutch construction and infrastructure firm Heijmans, are developing intriguing new products for the road markings market. One innovation involves painting road markings with glow-in-the-dark paint.
  • PlasticRoad, Orbia cyclepath in Mexico
    September 16, 2021
    Dutch firm PlasticRoad has helped create a climate-adaptive bicycle path made from around 1tonne of plastic waste in part of Mexico City's Chapultepec Forest