Skip to main content

Government is “Passing Water Pollution Buck to the Car Industry”, experts warn.

The Government acknowledged the serious and growing impacts of poisonous particle pollution from brake, tyre and road surface wear on the environment and human health - but diverted attention away from the immediate and urgent need to stop it entering directly into rivers and streams, water quality specialists have warned. Environment Minister Therese Coffey responded to a scientific report published by the Air Quality Expert Group by telling car and tyre manufacturers to prepare to reduce non-exhaust em
August 23, 2019 Read time: 4 mins
The Government acknowledged the serious and growing impacts of poisonous particle pollution from brake, tyre and road surface wear on the environment and human health - but diverted attention away from the immediate and urgent need to stop it entering directly into rivers and streams, water quality specialists have warned.


Environment Minister Therese Coffey responded to a scientific report published by the %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external Air Quality Expert Group false https://www.gov.uk/government/news/government-targets-particulate-matter-and-microplastic-pollution-from-cars false false%> by telling car and tyre manufacturers to prepare to reduce non-exhaust emissions and support the development of international measurement standards.  

The AQEG report made it clear that it is not just fumes from car exhaust pipes that have a detrimental impact on human health but also the tiny particles that are released from their brakes and tyres. While measures are being taken to reduce exhaust emissions, the report states that Non-Exhaust Emissions (NEE) remain largely unregulated and very little research has been done to understand their full impact.

The Government’s announcement warned that particles are entering the airstream and having a detrimental impact on human health for drivers, passengers and bystanders. It acknowledged that plastic particles from tyres are also deposited into sewers and lead to harmful consequences to marine wildlife and aquatic food chains.

Jo Bradley, Water Quality Specialist with SDS Limited, stated:

“Improving car and tyre designs to reduce metals, microplastics and hydrocarbons pollution will take years, especially if international standards of measurement and manufacturing control are also to be agreed and ratified.

“If the Government confirms the serious health and environmental impacts of this pollution then why is it passing the buck to the car industry and diverting attention from the need to stop harmful and widespread pollution from happening right now?

“Particles from brake and tyre wear include copper and zinc, microplastics and a group of chemicals called Polyaromatic Hydrocarbons (PAHs). They not only pervade the air but also settle on the road surface. When it rains mutagenic, carcinogenic, bioaccumulative chemicals are being discharged directly into the water environment via highway drainage outfalls.

“The regulations exist to control an estimated 1 million outfalls in the UK through environmental permitting, but they are not enforced, especially on motorways and trunk roads where many discharges are direct into vulnerable ditches and tributaries.   According to 8100 Highways England (HE) assessment tool (HAWRAT), more than 2500 outfalls in England pose a ‘very high’ or ‘high’ risk of pollution.  

“It’s been estimated that more than 60,000 tonnes of microplastics alone are being emitted on the road network annually1.  The EA has reported that only 14% of rivers in England reach ‘good’ ecological status and that urban and transport pressures are a significant contributor to those failures.

“UK industry has extensive know-how and innovative surface water technologies to solve the problem. Sustainable Drainage Systems (SuDS), usually comprising a management train of vegetative features and manufactured drainage devices, can capture microplastics, metals and PAHs entering the water environment. While there has been some welcome progress, many more point-source discharges could be measured and routinely controlled with straightforward treatment devices, such as filter drains. Where pollution is more severe, innovative technologies have been developed that capture metals and remove sediments, including microplastics, cost-effectively to shield the environment from harm.

“Yet, urban runoff persists as a forgotten polluter.  It is inconsistently monitored and poorly controlled.  This shocking Government response to the AQEG has – quite literally - kicked the contamination further down the road.”

About Jo Bradley:  Jo Bradley is an environmental water quality and sustainable drainage specialist at SDS Limited.  Before joining the company as Market Development Manager in 2016, Jo spent a 20 year career at the Environment Agency, latterly as an expert advisor on urban stormwater and highway runoff.

For more information on companies in this article

Related Content

  • Road safety move for young drivers
    April 11, 2024
    A new road safety focus for young drivers will save lives
  • Asphalt plant innovations coming to the market
    April 20, 2018
    The use of recycled materials continues to be a key issue for asphalt plant development, but other advances are also being introduced to meet market needs - Mike Woof writes The asphalt plant market has been a focus for a series of technical developments in recent years. Warm asphalt solutions and new technology for the use of recycled asphalt have been high on the R&D priority list for manufacturers of both continuous and batching type plants. However, new developing technology is not the only driver f
  • Current technologies could eliminate 90 per cent of traffic accidents
    April 27, 2012
    Nearly every traffic accident caused by driver error – up to 90 per cent of all crashes – could be eliminated if existing intelligent transportation technologies were implemented in vehicles and on roads, say experts at IEEE, the world's largest technical professional association. These include electronics and computing technologies such as in-vehicle machine vision and sensors to detect drowsy drivers, lane departure warning systems, and vehicle-to-vehicle and vehicle-to-infrastructure communications for s
  • Association's glass bead 'concern'
    April 11, 2012
    A study sponsored by the American Glass Bead Manufacturers' Association reveals that "a growing number of imported glass bead products for highway markings exhibit high concentrations of heavy metals, including arsenic and lead."